Forklift Training Programs Oakville

Forklift Training Programs Oakville - Are you searching for work as a driver of a forklift? Our regulatory-compliant mobile equipment operator training offers instruction in kinds of lift trucks, pre-shift check, fuel kinds and dealing with fuels, and safe utilization of a forklift. Practical, hands-on training assists individuals participating in obtaining essential operational skills. Program content covers current regulations governing the use of lift trucks. Our proven forklift programs are designed to offer training on these kinds of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

How to Safely Handle Loads

When the forklift is in use, do not raise or lower the forks. Loads must not extend higher than the backrest. This is because of the possibility of the load sliding back in the direction of the operator. Inspect for overhead obstructions and ensure there is enough clearance before lifting a load. Stay away from overhead power lines. Once the load is raised straight up, tilt it back slightly.

The lift truck is less stable when a load is in a raised position. Make certain that no one ever walks below the elevated fork. The operator must never leave the forklift when the load is lifted.

While handling pallets, forks must be high and level enough to go into the pallet and extend all the way under the load. The width of the forks should provide even distribution of weight.

Set the brakes and chock the wheels before unloading and loading the truck. The floors should be strong enough to support the combined weight of the load and the forklift. Fixed jacks can be installed to support a semi-trailer which is not attached to a tractor. The height of the entrance door must clear the forklift height by at least 5 cm. Edges of rail cars, ramps and docks must be marked and avoid them.

If there is not proper ventilation into the forklift, do not stay in there for long periods. The trucks interior must have adequate lighting and be free of obstructions. Inspect the flooring of the forklift cab for holes. The installation of material which are non-slip on the floor will help prevent slipping. Clear any obstacles from docks and dockplates and make sure surfaces are not oily or wet.

Forklifts should not be utilized to tow or push other forklifts.

Click to Download the pdf